Pressure Calibration
Pressure calibration is the comparison of the output of a device used to measure pressure with that of another pressure measurement device, or pressure measurement standard. This usually involves plumbing the device under test (DUT) to the standard device and generating a common pressure in the measurement circuit.
In our pressure calibration laboratory, we use fundamental pressure standards, such as piston gauges, with traceability through a national metrology institute. We can calibrate all secondary/ working level instruments such as Dead Weight Testers (Gauge/ Absolute/ Vacuum), Pressure calibrators, Test Gauges and Pressure Transmitters/ Gauges ranging from small pressures of only a few Pascal up to high pressures up to 2000 bar.
| Offerings | Technical Specification | Description |
|---|---|---|
|
Barometer Calibration |
Above 850 to 1300mbar |
Barometer Calibration |
|
Compound Gauge Calibration |
-0.9 to 20 Bar |
Compound gauge calibration (Accuracy Above 0.2%FSD)
Pressure and Vacuum calibration |
|
Dead weight tester Calibration |
0.1 to 1750 bar by Area method and Pressure Method |
Calibration facility for Dead Weight Tester for single piston or dual piston and hydraulic or pneumatic by Area method and Pressure Method
Accuracy (±) ≥ 80 ppm to 1000 ppm |
|
Digital Pressure Gauge Calibration |
2 to 2000 bar |
Digital Pressure Gauge calibration accuracy from 0.01% and above
Digital Pressure gauge, Indicator, Controller, Transmitter (Hydraulic and Pneumatic) |
|
Manometer Calibration |
0 to 2000mmWC |
Manometer Calibration |
|
Pressure Calibrator Calibration |
-1 to 2000 Bar |
2 sensor calibration |
|
Pressure Gauge Calibration |
Up to 1000 Bar |
Pressure Gauge calibration accuracy from 0.01% and above |
|
Pressure switch Calibration |
0 to 1000bar |
Calibration of Set points |
|
Vacuum and Pressure Controller Calibration |
0 to - 150mbar |
Calibration using Low pressure controller |
|
Vacuum Gauge Calibration |
Up to -0.95bar
-0.1 to -1 bar |
Vacuum gauge calibration above 0.025%FSD |