Mechanical Calibration

As you can see, the breadth of our capabilities allows us to respond to the diverse mechanical calibration which covers sub-parameters Dimension, Pressure, Mass & Volume, Force, Torque, etc. Reliable also offers vibration, density, acoustics, acceleration and speed calibration under their mechanical calibration services.

Our calibration ensures that their equipment and instruments will perform at their optimal level, every time.

mechanical-calibration
Offerings Technical Specification Description
Bevel Protractor Calibration
0 to 360°
Angle measurement Scale and Acute angle flatness and Parallelism
Caliper Checker Calibration
0 to 600 mm
External/Internal and Height measurement
Centre Distance Gauge Calibration
0 to 300mm
Linear calibration
Centrifuge Calibration
10 - 90000 RPM
Speed Calibration
Coating Thickness Gauge Calibration
0 to 6000 Microns
Linear error and foils thickness measurement
Combination Set Calibration
0 to 180°
Angular scale, Flatness of scales
Cylindrical Setting Master Calibration
3 to 200 mm
Calibration of Outside Diameter Min and Max reading
Depth Micrometer Calibration
0 to 300 mm
Linear measurement
Dial Bore Gauge / Bore gauge Calibration
Calibration up to 2mm
Diameter measurement
Dial Calibration Tester Calibration
0 to 25 mm
Linear measurement and Flatness of spindle
Dial Comparator Calibration
-)0.05mm-0.05mm
Linear measurement and Flatness of spindle
Dial Depth Caliper Calibration
0 TO 300 mm
Linear measurement
Dial Thickness Gauge Calibration
Calibration up to 50 mm
Turns, sensitivity, hysteresis and repeatability
Digimatic Height Gauge Calibration
0 to 1000mm
Linear measurement
Engineers Parallel /Rectangular Block Calibration
0 to 300 mm
Thickness, width and parallelism calibration
Extensometer Calibration
0 to 6 mm
Linear Measurement
Feeler Gauge Set Calibration
0.01mm to 2mm
Thickness measurement
Glass Scale Calibration
0 to 300 mm
Linear Measurement
Groove Micrometer Calibration
Up to 100 mm
Linear measurement
Hegman gauge Calibration
0-100micron
Thickness measurement
Hydrometer Calibration
0.6-1.6 g/ml
Linear scale by cuckoos method
Inside Dial Caliper Calibration
5mm to 100mm
Inside Dial Caliper, Outside Dial Caliper, Pistol Caliper
LENGTH BAR Calibration
up to 1000mm
Calibration using slip gauge set and electronic comparator with probe.
Length Measuring Machine (LMM) Calibration
up to 1000mm
Calibration Using K Grade Slip gauge set
Lever Dial Indicator Calibration
0 to 2mm/0.001mm
Lever Dial Indicator Calibration
Load cell with Indicator Calibration
up to 100 kgf
Only Compression Mode calibration
Machine Elongation (Traverse Length) Calibration
Up to 500 mm
Machine Elongation (Traverse Length)
Machine Speed (Traverse Speed) Calibration
Up to 500 mm/min
Machine Speed (Traverse Speed)
Micrometer Head Calibration
Up to 50 mm
Basic micrometer calibration
Optical Flats and Parallels Calibration
Per Face
Basic micrometer calibration
Measuring Tape Calibration
0 to 100 Mtr
Calibration as per standard
Pin Gauge Set Calibration
Calibration for all Types
Diameter Minimum and Maximum
Plain Ring Gauge Calibration
0 to 500 mm
Plain Ring Gauge
Plunger Dial Indicator Calibration
0 to 100mm/ 0.02mm
Turns, sensitivity, hysteresis and repeatability
Profile Projector Calibration
0-360°/0.001 mm
Linear-X and Y-10 points Angle
Radius Gauge Set Calibration
Up to 40mm
Per radius or per pitch
Scale Calibration
0 to 2000 mm
linear measurement
Sine Bar Calibration
Up to 300 mm
Parallelism Center Distance Angle
Slip Gauge Accessories Calibration
up to 300mm
Calibration of flatness and parallelism
Slip Gauge Calibrator Calibration
up to 100mm
Calibration using bridge and slip gauge set (error calculation)
Slip Gauge Set Calibration
up to 100 mm (Grade 0, I, II)
Thickness measurement
Snap Gauge Calibration
1mm to 400mm
Size measurement for Min and Max reading (Snap Gauge/ Gap Gauge (Go and No-go))
Sound Level Meter Calibration
95db and 114 dB
Acoustic sound at fixed points
Spirit Level /Electronic Blue level Calibration
0-300mm / 0.01 mm/Mtr
LHS and RHS calibration
Straight Edge Calibration
0 to 1200mm
Straightness Measurement
Surface Plate Calibration
400 x 400 mm 650 x 650 mm 1000 x 650 mm 1000 x 1000 mm 1600 x 1000 mm 2000 x 1000 mm
Flatness measurement
Surface Roughness Master Calibration
All types of roughness calibration
Roughness calibration
Tachometer Calibration
10 to 3000RPM - Contact type 10 to 90000RPM -Non-Contact type
Speed Calibration
Tape and Scale Calibrator Calibration
up to 1000mm
Linear error
Taper Scale Calibration
0-100 mm
Thickness measurement
Test Sieves Calibration
up to 25mm
Graticule length measurement
Thread Measuring Wire Calibration
0.29mm to 25mm
Diameter Measurement Minimum and Maximum
Thread Plug Gauge Calibration
Calibration up to 200mm and above
Major Diameter, Effective Diameter- Minimum and Maximum.
Thread Ring Gauge Calibration
Calibration up to 150 mm (NPT Go or No-go)
Effective Diameter- Minimum and Maximum.
Torque Wrench Calibration
0.2 to 3000 Nm
Torque Wrench Calibration at 20% 60% 100% of full range as per standard
Ultrasonic Thickness Gauge Calibration
up to 100mm
Linear measurement
V Anvil Micrometer Calibration
up to 100mm
Linear measurement
V Block Calibration
100 mm, 150mm and 300mm
Flatness Parallelism Perpendicular
Vernier Caliper Calibration
0 to 2000 mm
internal/external jaw and flatness and parallelism error
Vernier Height Gauge Calibration
0 to 1500 mm
Linear measurement
Vibration Meter Calibration
Acceleration: up to 190m/s2, Velocity: up to 375mm/s, Displacement: up to 1250µm
Calibration of Acceleration, Velocity and displacement
Weld Fillet Gauge Calibration
Up to 50 mm
Radius Measurement
Width Gauge Calibration
0 to 300mm
Actual size go/no-go
Wire Gauge Calibration
0.025mm to 10mm
Gap measurement
Impact Testing Machine Calibration
All ranges Calibration
Impact Testing machine Charpy
Push Pull Meter Calibration
5N to 500N
Calibration in push and pull mode
Spring Testing Machine Calibration
any range
Spring Testing Machine Calibration
Univeral Testing Machine Calibration
up to 10 Ton (100 kN)
Compression Mode (Universal / Tensile / Compression Testing Machine)
Brinell Hardness Tester Calibration
Indirect and Test Force Verification
Indirect and Test Force Verification
Load Verification of Hardness tester Calibration
3 kg to 3000 kg
Load verification with Indirect calibration
Micro Vickers Hardness tester Calibration
0.1, 0.2, 0.5 and 1 kg
Indirect Verification
Optical Brinell Hardness Tester Calibration
Indirect and Test Force Verification
Indirect and Test Force Verification
Rockwell Hardness Tester Calibration
Indirect Verification
Indirect Verification
Rubber Hardness Tester Calibration
0-100 shore
Shore A, D, AO, AM type, Calibration by Spring force / Indentation depth calibration method
Vicker Hardness Tester Calibration
Indirect and Test (1kg to 30kg)
Indirect and Test Force Verification
Loose Weight Calibration
500 gm to 50 Kg
Loose Weight Calibration
Spring Balance
Up to 50kg
Calibration checked for linear error, repeatability, hysteresis and eccentricity
Weighing Scale / Weighing Balance Calibration
Calibration up to 300kg
Calibration checked for linear error, repeatability, hysteresis and eccentricity
Weight Set Calibration
1mg to 200gm (Class-F1, F2, M1, M2)
Analytical Weight Box calibration
Dispenser Calibration
10ml to 100 ml
Volume Calibration
1ml to 5000ml
1ml to 5000ml
Volume Calibration
Micropipette Calibration
10µL to 10 ml
Volume Calibration
Pipette and Measuring Cylinder Calibration
0.1ml to 25ml
Volume Calibration
Volumetric Flask Calibration
1ml to 5000ml
Volume Calibration